 | | UTP Cat5e Outdoor 009 | Meet or exceed the industry standard for Category 5E.
High transmission performance, applied in a bandwidth of over 100 MHz.
Support 1000BASE-T Ethernet (IEEE802.3ab).
With waterproof designing, and applied to adverse outdoor environment.
|
|  | | CMP UTP Cat5e Cable | 1.Standard: UL4444/UL910, ANSI/TIA/EIA 568B.2-1, ISO/IEC11801 CLASS E
2.Conductor:Material Bare Copper Construction 24AWG 3.Insulation:Material FEP (Type: NP-101 from DAIKIN Fluoroch |
|  | | UTP CAT5 Cable 012 | | Meet or exceed the industry standard for Category 5e.
High transmission performance, applied in a bandwidth of over 100 MHz.
Support 1000BASE-T Ethernet (IEEE802.3ab).
CMX: UL listed for safety to CMX.
CM: UL listed for safety to CM.
CMR: UL listed for safety to CMR.
LSZH: According to IEC332-3,IEC754-2, NES713.
CMP: Designed with FEP cable structure, meet standard of UL444/UL910, and UL listed for safety to CMP.
|
|
|
 | | UTP Cat6 Cable 010 | | Meet or exceed the industry standard for
Category 6requirements.
Support 1000BASE-T Ethernet (IEEE802.3ab).
Applied in a bandwidth of over 250 MHz.
With X-Filler designing.
Applied to horizontal cabling.
CMX: UL listed for safety to CMX.
CM: UL listed for safety to CM.
CMR: UL listed for safety to CMR.
CMP: Designed with FEP cable structure,meet standard of
UL444/UL910, and UL listed for safety to CMP.
|
|  | | UTP Cat5e Cables 008 | | Meet or exceed the industry standard for Category 5.
High transmission performance, applied in a bandwidth of over 100 MHz.
Support 1000BASE-T Ethernet (IEEE802.3ab).
CMX: UL listed for safety to CMX.
CM: UL listed for safety to CM.
CMR: UL listed for safety to CMR.
LSZH: According to IEC332-3,IEC754-2, NES713.
CMP: Designed with FEP cable structure, meet standard of UL444/UL910, and UL listed for safety to CMP.
|
|  | | UTP Cat5 Outdoor 007 | | Meet or exceed the industry standard for Category 5.
High transmission performance, applied in a bandwidth of over 100 MHz.
Support 1000BASE-T Ethernet (IEEE802.3ab).
With waterproof designing, and applied to adverse outdoor environment.
|
| |
|  | | FTP Cat6 Cable 005 | | Meet or exceed the industry standard for Category 6requirements.
Support 1000BASE-T Ethernet (IEEE802.3ab).
Applied in a bandwidth of over 250 MHz.
With X-Filler designing.
Applied to horizontal cabling.
Meet the highest requirements for Electromagnetic
Compatibility
CMX: UL listed for safety to CMX.
CM: UL listed for safety to CM.
CMR: UL listed for safety to CMR.
LSZH: LSZH Jacket, manufactured according to IEC332-
3,IEC754-2,NES713
|
|  | | FTP Cat5e Cable 004 | | Meet or exceed the industry standard for Category 5e.
High transmission performance, applied in a bandwidth of over 100 MHz.
Support 1000BASE-T Ethernet (IEEE802.3ab).
Meet the highest requirements for Electromagnetic
Compatibility (EMC).
CMX: UL listed for safety to CMX.
CM: UL listed for safety to CM.
CMR: UL listed for safety
LSZH: manufactured according to IEC332-3,IEC754-2,
NES713
|
| |
 | | FTP CAT5 Cable FTP-CAT5-Cable | Meet or exceed the industry standard for Category 5.
High transmission performance, applied in a bandwidth of over 100 MHz.
Support 1000BASE-T Ethernet (IEEE802.3ab).
Meet the highest requirements for Electromagnetic
Compatibility (EMC).
CMX: UL listed for safety to CMX.
CM: UL listed for safety to CM.
CMR: UL listed for safety
LSZH: manufactured according to IEC332-3,IEC754-2, NES713
|
|  | | CMP UTP Cat6 Cable 002 | 1.Standard: UL4444/UL910, ANSI/TIA/EIA 568B.2-1, ISO/IEC11801 CLASS E
2.Conductor Material Bare Copper
Construction 23AWG
3.Insulation Material FEP (Type: NP101 FEP from DAIKIN )
Thickness MIN at any point:0.18mm, AVG:0.23MM
|
|  | | UTP Cat6 Outdoor Cable 011 | | Meet or exceed the industry standard for Category 6
requirements
Support 1000BASE-T Ethernet (IEEE802.3ab).
With X-Filler designing.
Applied to horizontal cabling.
With waterproof designing, and applied to adverse outdoor
environment.
|
| |
 | | Cat5e Patch Cord 001 | | Meet or exceed the industry standard for Category 5E
requirements. yet are fully backward compatible with lower systems.
Mate with patented shield RJ45 plug design to deliver superior
electrical performance with excellent repeatability.
The unique anti-snagging feature simplifies removal and
replacement of patchcords.
UL listed for safety to CM/CMX.
|
|  | | Cat6 Patch Cord 002 | | Meet or exceed the industry standard for Category 6 requirements.
yet are fully backward compatible with lower systems.
Mate with patented shield RJ45 plug design to deliver superior
electrical performance with excellent repeatability.
The unique anti-snagging feature simplifies removal and
replacement of patchcords.
UL listed for safety to CM/CMX.
Meet the highest requirements for Electromagnetic Compatibility(EMC).
|
|  | | Cat6 Patch Cords 003 | | Meet or exceed the industry standard for Category 6 requirements.
yet are fully backward compatible with lower systems.
Mate with patented shield RJ45 plug design to deliver superior
electrical performance with excellent repeatability.
The unique anti-snagging feature simplifies removal and
replacement of patchcords.
UL listed for safety to CM/CMX.
Meet the highest requirements for Electromagnetic
Compatibility(EMC).
|
| |
 | | FTP Cat5e Patch Cord 004 | | Meet or exceed the industry standard for Category 6requirements.
yet are fully backward compatible with lower systems.
Mate with patented shield RJ45 plug design to deliver superior electrical performance with excellent repeatability.
The unique anti-snagging feature simplifies removal and
replacement of patchcords.
UL listed for safety to CM/CMX.
|
|  | | Coaxial Cable RG6-DUAL | Physical Specification
Component:RG6 Siamese mm
Inner Conductor:1.02
Dielectric:4.57
Shield:Tape+Braid 60%
Jacket:6.95
Jacket Wall Thickness:0.89
|
|  | | Coaxial Cable QR540 | | Physical Specification
Component:QR 540 JCA mm
Inner Conductor:3.15
Dielectric:13.03
Outer Conductor（Tube）:13.72
Jacket:15.40
Jacket Wall Thickness:0.97
|
| |
 | | Coaxial Cable LMR400 | | Physical Specification
Component:LMR-400 mm
Inner Conductor:2.74
Dielectric:7.24
Shield:Tin/BC Copper 95%
Jacket:10.29
Jacket Wall Thickness:1.07
|
|  | | Coaxial Cable RG213 | Physical Specification
Component:RG213 mm
Inner Conductor:7X0.75
Dielectric:7.25
Shield:Tin/BC Copper 95%
Jacket:10.10
Jacket Wall Thickness:1.09
|
|  | | Coaxial Cable RG6 | | Physical Specification
Component:Standard Shield mm,Tri-Shield mm,Quad-Shield mm
Inner Conductor:1.02,1.02,1.02
Dielectric:4.57,4.57,4.57
Shield（Tape）: Al/Pet,Al/Pet/Al
Braid（Coverage %）:60,60,60
Jacket:6.90,7.06,7.56
Jacket Wall Thickness:0.78,0.78,0.86
|
| |
 | | Coaxial Cable RG6-MESSENGER | | Physical Specification
Component:Standard Shield mm,Tri-Shield mm,Quad-Shield mm
Inner Conductor:1.02,1.02,1.02
Dielectric:4.57,4.57,4.57
Shield（Tape）:Al/Pet,Al/Pet/Al
Braid（Coverage %）:60,60,60
Jacket:6.90,7.06,7.56
Jacket Wall Thickness:0.78,0.78,0.86
Steel Messenger:1.30 1.83,1.30 1.83,1.30 1.83
|
|  | | Coaxial Cable RG7 | | Physical Specification
Component:Standard Shield mm,Tri-Shield mm,Quad-Shield mm
Inner Conductor:1.29,1.29,1.29
Dielectric:5.72,5.72,5.72
Shield（Tape）:Al/Pet,Al/Pet/Al
Braid（Coverage %）:60,60,60
Jacket:8.10,8.20,8.64
Jacket Wall Thickness:0.82,0.82,0.84
|
|  | | Coaxial Cable RG11 | | Physical Specification
Component:Standard Shield mm,Tri-Shield mm,Quad-Shield mm
Inner Conductor:1.63,1.63,1.63
Dielectric:7.11,7.11,7.11
Shield（Tape）:Al/Pet,Al/Pet/Al
Braid（Coverage %）:60,60,60
Jacket:10.10,10.16,10.30
Jacket Wall Thickness:1.02,0.97,0.95
|
| |
 | | Coaxial Cable RG11-MESSENGER | | Physical Specification
Component:Standard Shield mm,Tri-Shield mm,Quad-Shield mm
Inner Conductor:1.63,1.63,1.63
Dielectric:7.11,7.11,7.11
Shield（Tape）:Al/Pet,Al/Pet/Al
Braid（Coverage %）:60,60,60
Jacket:10.10,10.16,10.30
Jacket Wall Thickness:1.02,0.97,0.85
Steel Messenger
1.83
2.77
1.83
2.77
1.83
2.77
|
|  | | Coaxial Cable RG58 | | Physical Specification
Component:RG58A/U mm,RG58 B/U mm
Inner Conductor:19×0.18,0.81
Dielectric:2.95,2.95
Shield:Tinned Copper 95%
Jacket:4.95,4.95
Jacket Wall Thickness:0.87,0.87
|
|  | | Coaxial Cable RG59 | | Physical Specification
Component:Standard Shield mm,Tri-Shield mm,Quad-Shield mm
Inner Conductor:0.81,0.81,0.81
Dielectric:3.70,3.70,3.70
Shield（Tape）:Al/Pet,Al/Pet/Al
Braid（Coverage %）:60,60,60
Jacket:6.10,6.20,6.70
Jacket Wall Thickness;0.82,0.82,0.82
|
| |
 | | Coaxial Cable QR500 | | Physical Specification
Component:QR 500 JCA mm
Inner Conductor:2.77
Dielectric:11.50
Outer Conductor（Tube）:12.65
Jacket:14.70
Jacket Wall Thickness:1.03
|
|  | | UTP Cat6 Single Port Module 009 | | Meet or exceed the industry standard for Category 6
Used in equipment and Room & Work Area as connectors.
The structure is compact,which makes your work easy and fast.
The original dust-free cap can prevent the cable from
slipping off the IDC Port.
Wire color identification per T568A & 568B.
Connecting: RJ45 port for UTP patch cord and the IDC port for UTP horizontal cabling.
|
|  | | UTP Cat6 Plug 008 | | Cat6 UTP 8P8C Plug.
one roll three branchs.
Meet or exceed the industry standard for Category 6requirements. |
| |
 | | UTP Cat5e UTP Singal Port Module(A) 007 | | Meet or exceed the industry standard for Category 5e
Used in equipment and Room & Work Area as connectors.
The structure is compact,which makes your work easy and fast.
The original dust-free cap can prevent the cable from
slipping off the IDC Port.
Wire color identification per T568A & 568B.
Connecting: RJ45 port for UTP patch cord and the IDC port for UTP horizontal cabling.
|
|  | | UTP Cat5e Plug 006 | | Cat5e UTP 8P8C Plug.
one roll two branchs.
Meet or exceed the industry standard for Category 5erequirements.
|
|  | | FTP Cat5e Plug 005 | | Meet or exceed the industry standard requirements.
Meet the highest requirements for Electromagnetic
Compatibility (EMC).
|
| |
 | | Cat6 Patch Panel 004 | | 19" Module frame with 24 ports patch panel, Cat6 type, meet or exceed the industry standard for Category 6
Wire color identification per T568A & 568B.
Entire high-carbon steel outer frame, with plastic powder cladding.
Punching Duration:250times. FCC ports inserting duration:750 times.
|
|  | | Cat5e UTP Single Port Module(B) 003 | | Meet or exceed the industry standard for Category 5e
Used in equipment and Room & Work Area as connectors.
The structure is compact,which makes your work easy and fast.
The original dust-free cap can prevent the cable from
slipping off the IDC Port.
Wire color identification per T568A & 568B. Connecting: RJ45 port for UTP patch cord and the IDC port for UTP horizontal cabling. |
|  | | Cat5e Patch Panel 001 | | 19" Module frame with 24 ports patch panel, Cat6 type, meet or exceed the industry standard for Category 6
Wire color identification per T568A & 568B.
Entire high-carbon steel outer frame, with plastic powder cladding.
Punchin g Duration:250times. FCC ports inserting duration:750 times.
|
| |
 | | Wiring Block 010 | | 100pairs/200pairs 110 IDC wiring block
Can meet transmission requirement according to different patch cord attached
Wire color identification per T568A&568B
Applicable to horizontal connection between equipments
Simple to install, reduce installation fee
|
|  | | Cat5e FTP Single Port Module 002 | | Meet or exceed the industry standard for Category 5e
Used in equipment and Room & Work Area as connectors.
The structure is compact,which makes your work easy and fast.
the original dust-free cap can prevent the cable from
slipping off the IDC Port.
Wire color identification per T568A & 568B.
Connecting: RJ45 port for UTP patch cord and the IDC port for UTP horizontal cabling.
Tooless punching assembly the cables with punching cover. |
|
